| No.32821W Body/Chassis Set |
□Available : Apr 2013 |
Advanced design and performance combines with the ultimate in scale detail.
MR-03 chassis can be fitted with all MINI-Z bodies!
 Same battery layout as the MR-02 chassis achieves a low center of gravity with a main chassis width equal to the narrow MR-015. The main chassis is compatible with all MINI-Z Racer body styles. *Some parts maybe required separately. |
|
 Equipped with 2.4GHz R/C unit specially designed for the MR-03. Requires no frequency bands. Simply switch power ON and enjoy safe and stable control. |
|
 Digital steering servo features a coreless motor and a gear unit that has 3 times the gear reduction ratio of previous units for powerful movement and position retention. |
 Can be set to either narrow or wide tread by replacing the front lower and upper plates and steering tie rod. Of course the wheelbase can still be adjusted to suit certain car types. *Change wheelbase requires optional parts. |
|
 Optional gyro unit can be fitted for automatic correction of steering and throttle for even easier control. Layout design has space allocated so the gyro unit can be easily installed. |
|
|
- Workmanship and detail that can be displayed alongside the most refined display models.
- Compatible with the full range of MINI-Z body styles. *Special motor case and differential gear assembly maybe required to fit some body styles.
- Features newly designed innovative ‘VCS’ front suspension that changes camber angle in response to suspension stroke.
- Equipped with digital servo with integrated coreless motor.
- Compatible with all body styles with matching motor case and Auto Scale Collection wheels and tires.
- Features ASF 2.4GHz System that requires no frequency bands. Single transmitter can be used with 2 or even 3 different models. *PERFEX KT-18 transmitter is sold separately.
- Coil springs on front suspension can be easily replaced by removing the spring stopper with just two screws.
Chassis type for each MR-03 set is displayed below.
Refer to this table when fitting a MINI-Z Racer body.
|
＜Note: When Converting＞
| ●Front tread |
： |
When converting to narrow or wide tread, the appropriate type of front lower and upper plates as well as the steering tie rod are required. |
| ●Rear tread |
： |
Install the special wheels included on the each body. |
| ●Wheelbase |
： |
Adjust with the parts included on the body. |
|
|
VCS (Variable Camber Suspension) takes performance to a new dimension!
|
Upper arms connected to king pins and knuckles with ball links allow the camber angle to change with suspension stroke, just like on a real car. Tire contact with the surface remains constant, even during chassis roll and suspension stroke from surface tracing. The newly developed digital steering servo uses a coreless motor that delivers quick steering response and sharp maneuverability that feels like its riding on rails. Also, the upper arm and one-piece cantilever provide ideal cushioned movement for the coil spring. In addition, the stainless steel king pin and wheel shaft delivers smooth movement for excellent running stability. Precision geometry settings eliminate toe in and toe out change during suspension stroke and produce a neutral steering feel. The innovative VCS (Variable Camber Suspension) represents a significant evolutionary step in the history of the MINI-Z.
|
|
Newly developed digital steering servo features coreless motor and new gear reduction ratio
|
 The powerful position retention and movement of the digital servo is enhanced with the adoption of a coreless motor that provides instantaneous pick up and stopping. In addition, the newly developed steering gear unit has 3 times the gear ratio of previous versions for greater power in holding its position so it holds its line firmly in the face of kickbacks from the road surface and also delivers even more precise movement and response.
|
|
< About Fine Hand Polish >
|
 A new surface-finishing technology that provides a hard glossy finish in bright lustrous colors. The hardened surface protects the paintwork from marks and dirt so the beautiful car body is easily maintained in all its original glory. |
|
|
*Requires installation of body mount and wheels and tires for operation.
|
＜ Body / Chassis Set Contents ＞
- Semi-assembled chassis
- Completed body, finished with painting and affixed with decals & Front Body Mount(included)
- MM specification power unit (installed)
- Lower and upper plate for wide tread (front), steering tie rod (installed)
- Front suspension spacer for adjustment
- 6T. 7T. 8T. 9T Pinion Gear
- Wheel wrench
- Pinion removing tools
- Pairing stick
- Spare wheel nut
- Tyre,Wheel (included)
|
*PERFEX KT-18 Transmitter
|
＜ ReadySet Contents ＞
- ASF2.4GHz PERFEX KT-18 Transmitter for MINI-Z or EX-5UR Transmitter
- 4 x AAA-size alkaline or NiMH batteries
- 4 x AAA-size alkaline batteries for transmitter (KT-18), 8 x AA-size alkaline batteries (EX-5UR)
|
| Length |
124～133mm（MM Chassis:125～133mm、RM Chassis:124～132mm） |
| Width |
65～76mm |
| Height |
34～35mm |
| Wheelbase |
86～106mm（86、90、94、98、102、106） |
| Tread (F/R) |
(Wide)61.5mm / 59mm (Narrow)56.5mm / 56.5mm [when wheel offset is 0] |
| Tire(F/R) |
23.5～25×8.5mm / 25～27×8.5～11mm |
| Gear Ratio |
7.3、6.3、5.5、4.9：1 |
| Weight |
135g approx. |
| Motor |
130-Class |
|
Compatible Transmitters with Easy to Use Overtake Button for Chase Mode
|
| Push the 3rd channel button under the steering wheel to activate the speed burst in Chase mode. For 3 seconds the motor delivers its full power output. Choose the critical time to release the speed burst and win the race! Experience the excitement of real racing with a Chase mode compatible 3-channel transmitter. With the 2.4GHz ASF system operating on the 2.4Ghz frequency, the control system automatically scans and selects open bands when it is switched on to prevent interference. Also, the system allows up to 40 models to be run in the same race. With the simple one-touch pairing (binding or registering of the transmitter with the receiver), a single transmitter can be used to control multiple models.*Set does not include R/C System. |
|
|
|
□Last updated:04 May 2013
PAGE TOP
|
|
